Pre-mixer
Water Cooling Belt
GTY Series Drum Cooler
The drum cooler is composed of cooling- sheeting rolls,PU belt , crushing system. The discharged material from extruder is sheeted at thickness of 1-2mm by rollers that are cooled by water. The sheeted material is transported by PU belt to the crusher while being continually cooled by water, Then crushed chip material falls down to the hopper. Attention: Temperature of cooling water should be <12 degree C
Features:
• Compact design, short length
• Easy to clean
• Low use cost
• Very good cooling effect
Technical Parameters:
| Model | Throughput | Big Roller Diameter | Belt Width | Roller motor | Crushing motor | Dimension |
| GTY-200 | 100-200 | 420 | 600 | 1.5 | 1.1 | 1.70*1.50*1.50 |
| GTY-400 | 300-400 | 600 | 600 | 1.5 | 1.1 | 1.70*1.50*1.50 |
| GTY-600 | 500-600 | 800 | 800 | 1.5 | 1.1 | 1.90*1.72*1.60 |
| GTY-800 | 600-800 | 1000 | 1000 | 1.5 | 1.1 | 2.10*1.92*1.80 |
No.789, Jinbu Street
Muping District, Yantai 264100
Shandong Province, China
Tel: +86 0535 6990899
Fax: +86 0535 6990799
