Stainless Steel Pelletizer
The Stainless Steel Pelletizer is composed of cooling- feeding device, stainless steel band conveyor, crusher and driving system. The hot melted material is sheeted at thickness of 1-1.5mm that are cooled by water. The sheeted material is transported to the crusher while being continually cooled by water which is sprayed to the underside surface of the stainless steel band (or cooled by refrigerated air). Then crushed chip material falls down to the hopper. Attention: Temperature of cooling water should be <15 degree C>Application: The pelletizer is applied to products with the melting point below 250°C for curing and shaping. Typical applied materials include: Sulphur, Paraffin Wax, Resin, Asphalt, Maleic Anhydride, Trimellitic Anhydride, Salt Stearate, Hot-Melt Adhesives, M-Phenylenediamine, Urea, Rubber and Plastic Auxiliary etc.
Working principle: Melting material, through material distributor, drips down to the steel belt which is moving evenly. Under the belt, there are continuous sprayer and cooling device which can cool, solidify and pelletize material on belt as soon as possible. According to material feature and process requirements, outward turning, rotating, reciprocating, gate types are available for your choice. Based on material feature and use requirements, material distributing forms like incontinuous dripping, continuous strip, full-width overflowing are available, and with hemispheric, bar, flake products.
No.789, Jinbu Street
Muping District, Yantai 264100
Shandong Province, China
Tel: +86 0535 6990899
Fax: +86 0535 6990799
